Nov 17, 2022 Leave a message

How To Solve The Problem Of Carton Collapse

In the production process, there will be a headache. The solution is to improve the cardboard material, improve the compressive strength and moisture resistance, so as to reduce the rate of box collapse. In addition, some factories need to improve the adhesive strength, increase the solid content of starch paste, and improve the hardness of paperboard by reducing the amount of glue, so as to solve the problem of poor adhesion of the carton gluing machine.

The following points should be paid attention to in the production and use of how to deal with the problem of case collapse caused by poor adhesion of the case gluing machine:

1. Control the use of base paper

Check the sizing of corrugated paper and the water absorption index of base paper surface. If the surface sizing of the base paper is poor, the water absorption will be on the high side. It is easy to be affected by the cold and humid environment of the hand cold storage, which will lead to moisture regain, softening, and reduction of the finishing compressive strength.

2. Control the moisture content of paperboard when producing paperboard

The moisture content of the paperboard should not be too much, because a large amount of moisture will lead to a low hardness of the paperboard and affect the edge pressure index of the paperboard. In the process of cardboard processing, the amount of glue on the single side machine and the double side machine shall not be too large. Once the amount of glue is large, the corrugated shape of the paperboard will deform, and the corrugated shape will directly affect the edge pressure of the paperboard, and the compressive strength will also decrease as the edge pressure decreases.

3. The adhesive strength of cardboard should be high

The adhesive strength is the adhesive strength of corrugated paper, lining paper and face paper. In case of false adhesion of paperboard, the face paper or lining paper will be separated from the corrugated paper after being pressed, and the compressive strength will decline linearly.

4. The clearance pressure control in the production process should be moderate

In particular, it should be noted that the gap pressure of the paste on the box pasting machine should not be too small, and the gap pressure of the sun wheel on the double-sided machine and die-cutting machine should be controlled within a reasonable range to avoid crushing the corrugated shape and affecting the compressive strength of the cardboard.

5. Use water splashing agent and waterproof varnish to solve the problem of surface waterproof and moisture-proof.

6. The pressure in the printing process should be controlled appropriately. Excessive pressure will crush the corrugated type, leading to corrugated deformation and affecting the compressive strength of the cardboard.

7. Time of storage. Even under constant temperature and humidity conditions, long-term storage will lead to softening of the box.

8. Storage stacking method. For example, cantilever stacking, staggered stacking, wolf tooth cross stacking and shelf free stacking will greatly reduce the compressive strength of corrugated boxes.

In addition to the resonance and impact of vehicles during transportation, manual handling and turnover times are unavoidable. We should try our best to avoid the accidents mentioned above, so that we can effectively avoid the possibility of heavy corrugated boxes collapsing.


Send Inquiry

whatsapp

skype

E-mail

Inquiry