Nov 04, 2022 Leave a message

Production Process Of Recycled Kraft Paper, How To Recycle The Paper

Since the establishment of the first waste paper recycling plant in Philadelphia in 1690, the waste paper recycling technology is still developing and expanding. Many types of paper, toilet paper, newspapers... supplied to the packaging industry are made entirely or partly from recycled paper materials. The recycling industry organizes waste paper collection and classification; Then they are packed and pressed into large squares (extruded) for easy transportation and storage. Then these recycled paper bags will participate in the fiber regeneration process to help people solve environmental protection problems.

1. Select

In order for the paper to be recycled successfully, the recycled paper must be clean and divided into different categories. Paper used as raw material cannot be polluted by impurities and impurities, such as food residues, plastics, metals, etc. Because they make it difficult to recycle paper. Paper mixed with too much dirt and impurities cannot be recycled. It must be processed into fertilizer, burned to recover heat or buried.

Rotary device for waste paper sorting

2. Collection and transportation

Waste paper is collected, bagged, compacted and transported to a paper mill where it will be recycled into a new type of paper.

3. Storage

Different types of waste paper, such as newspapers and used cartons, will be stored in different warehouses, because paper mills use different types of recycled paper to produce different types of recycled paper. When required by the factory, workers will use forklifts to transport the recycled paper from the warehouse to the conveyor belt.

4. Pulp and screen regeneration

The paper is conveyed by a conveyor belt to a large tank called a pulp tank, which contains water and chemicals. The pulping tank cuts the recycled paper into small pieces. Heating the mixture causes the paper to be quickly cut into what is called cellulose fiber (the main component of plants). Recycled old paper will be broken into a thick paste called powder. Pushing the powder into a sieve with holes and grooves of various shapes and sizes; The place where small impurities such as nylon or adhesive tape will be trapped. This process is called screening.

5. Cleaning

The powder will be cleaned by shaking in a conical tube, through which heavy impurities such as needles, pins, etc. will be knocked out of the cone and fall to the bottom of the tube. Light impurities are collected in the center of the cone and will be removed. This process is called grinding.

6. Deinking

Sometimes the powder must go through a "washing" process called deinking to remove ink and tape (including adhesives and tape). Papermakers usually combine two ink removal processes called flushing, in which small ink particles are washed off with water, and then floatation is used to remove larger particles and take them away with bubbles. In the flotation deinking process, the powder is stored in a large tank called the flotation system, where air and soapy chemicals called surfactants are bubbled into the powder. Surfactants separate the ink and tape from the powder and push them to the surface of the mixture through bubbles. The bubble filled with ink forms a bubbling bubble at the top and is removed, leaving a "clean" amount of powder below.

7. Grinding, bleaching, whitening

During the grinding process, the pulp is crushed to loosen the fibers, making it an ideal choice for papermaking. If there are large bundles of fibers in the dough, the grinding process will separate them to loosen and separate them. If there are colors in the waste paper, bleach will help to remove them. Then, if white paper is to be produced, the pulp must be bleached with hydrogen peroxide, chlorine dioxide or oxygen to become whiter and brighter. If industrial kraft paper (such as carton paper) is produced, this bleaching step is not required.

8. Folding paper

At this point, we have prepared the dough for the papermaking process. Regenerated fibers can be used alone or mixed with wood fibers (called primary fibers) to increase smoothness or strength. Mix the powder with water and chemicals to achieve a mixture of 99.5% water. This water powder mixture enters a very large metal barrel at the beginning of the paper machine, called the head barrel; Then it will be continuously sprayed on a very fast moving mesh by the machine. On that grid, water will start to flow out of the powder, and the recycled fiber will quickly thicken to form a wet, saturated sheet. This paper will quickly pass through a series of presses (also called blankets/blankets) covered with tarpaulins to help squeeze out more water. Wet paper - which now looks more like plain paper - is dried by a series of heated metal rollers. If something is to be coated on the paper, the paint mixture is introduced at the end of the cycle, or in another process after the paper is laid (made). The coating is designed to give the paper a smooth, easy to print surface.


Send Inquiry

whatsapp

skype

E-mail

Inquiry